1 Pair Subscriber Terminal Block(STB); VX Five Point Connection Module
1 Pair Subscriber Terminal Block(STB); VX Five Point Connection Module The subscriber terminal block consists of a rectangular box base with a cover and two five-pole connection modules secured in a stainless steel plate. The top and base are hinged together, and the top is easily removable to...
1 Pair Subscriber Terminal Block(STB) VX Five Point Connection Module, Tyco Drop Wire Connection Module, Telephone modules, user-friendly design, no need professional operations, the module with full gel-filled, fixed it with mounting on a standard DIN rail and can be mounted in a variety of housings in whatever quantities are required. The small footprint (2 cm wide) ensures a compact product.all the terminal block can be fast and easily finish telecom wire connection. The Drop wire module is used for the connection of outdoor to indoor drop wire. It allows for circuit testing in both network directions.
The subscriber terminal block consists of a rectangular box base with a cover and two five-pole connection modules secured in a stainless steel plate.
The top and base are hinged together, and the top is easily removable to facilitate working in cramped conditions.
The cable grommets for wire entry and exit may be adjusted to conductor size and are also removable.
A metal screw is provided in the wire housing recesses to secure the grounding wire.
|Gauge range (Drop wire connector)||0.4 to 1.05 mm Ø|
Insulation diameter (Drop wire connector)
|5 mm max. Ø|
|Dry atmosphere||> 1012Ω|
|Damp atmosphere (ASTM D618)||> 1012Ω|
|Salt fog (ASTM B117)||> 1010Ω|
|Immersion in water(15 days in 3 % NaCl solution)||> 1010Ω|
|Rmaterial + Rbridge contacts + Rwire contacts||< 10 mΩ|
After climatic tests
|< 2.5 mΩ|
After 50 reinsertions
|< 2.5 mΩ|
|Current conducting capacity|
20 A, 10 A per conductor for 10 minutes at least without causing deformation of the module
(If > 20 A up to 30 A is required, this is possible using a different GDT)
Pair/drop wire housing screw:
|Special passivated direct +lacquered Zamac alloy|
|Drop wire housing body:||Transparent polycarbonate|
|Flame retardant (UL 94) glass-fiber |
|Insertion contacts :||Tinned phosphor bronze|
Ground contacts :
|Cu - Zn - Ni - Ag alloy|
|Continuity contacts:||Tinned hard brass|
|Lower sealant:||Polymeric resin|
|Upper cable sealant:||Silicone sealant|
|Pair/drop wire bearing cover:||Nate|
|Plug-in module body:|
Flame retardant (UL 94) glass-fiber reinforced polycarbonate
Plug-in module sealant:
|Cable/drop wire membrane:||Thermoplastic rubber|
- Previous: 1 Pair STB Connection Module or Drop Wire Module Overvoltage and Overcurrent Protection
- Next: 10 Pair Tyco C5C Termination Magazine Blocks