AMP Cat 6 SL 110 Modular Jacks HY-6107C6

Hongyi Telecom Category 6 SL 110 type modular jacks exceed ANSI/TIA-568-C.2and ISO/IEC 11801 component requirements and Category 6/Class E system performance. The Category 6 System complies with all of the performance requirements for current and proposed applications such as Gigabit Ethernet (1000BASE-TX), 10 and 1 OOBASE-TX, token ring, 155 Mbps ATM, 100 Mbps TP-PMD, ISDN, analog and digital video, and analog and digital voice (VoIP). The Category 6 SL Series Modular Jacks have a slim profile and are compatible with SL Series and 110 Connect faceplates. Universal wiring labels permit termination to either T568A or T5688 wiring patterns. The modular jack is available in shielded and unshielded options. The unshielded jacks offer an optional integral dust cover. Unshielded jacks allow cables to be dressed at either 180° (rear) or 90° (either side) for added flexibility. Patented bend-limiting strain relief may also be used to reduce stress on cable at the point of termination and is included with each unshielded modular jack. SL Series Modular Jacks are available in almond, black, gray, orange, blue, red, yellow, green, violet, electrical ivory and alpine white (see part number table for color samples).

Product Details

 AMP Cat 6 SL 110 Modular Jacks, AMP keystone jacks, Cat 6 modular jacks, Networking connector,

     Hongyi Telecom Category 6 SL 110 type modular jacks exceed ANSI/TIA-568-C.2and ISO/IEC 11801 component requirements and Category 6/Class E system performance.

The Category 6 System complies with all of the performance requirements for current and proposed applications such as Gigabit Ethernet (1000BASE-TX), 10 and 1 OOBASE-TX, token ring, 155 Mbps ATM, 100 Mbps TP-PMD, ISDN, analog and digital video, and analog and digital voice (VoIP).

The Category 6 SL Series Modular Jacks have a slim profile and are compatible with SL Series and 110 Connect faceplates. Universal wiring labels permit termination to either T568A or T5688 wiring patterns. The modular jack is available in shielded and unshielded options. The unshielded jacks offer an optional integral dust cover. Unshielded jacks allow cables to be dressed at either 180° (rear) or 90° (either side) for added flexibility. Patented bend-limiting strain relief may also be used to reduce stress on cable at the point of termination and is included with each unshielded modular jack. SL Series Modular Jacks are available in almond, black, gray, orange, blue, red, yellow, green, violet, electrical ivory and alpine white (see part number table for color samples).

Materials

Modular Jack Housing:………………….. Polycarbonate, 94V-0 rated

110 Connecting Blocks: …………………Polycarbonate, 94V-0 rated

Contacts: …………………..Beryllium copper, plated with 1.27μm [50μin] thick gold in the localized area and 3.81μm [150μin] minimum thick matte tin in solder area over 1.27 μm [50 μin] minimum thick nickel underplate

Insulation Displacement Contacts: ………..Phosphorous bronze, plated with 3.81μm [150μin] minimum thick matte tin-leadover 1.27μm [50μin] minimum thick nickel underplate

Integral Dust Cover: ……………………….Polycarbonate

Shield: ……………………………….Copper-zinc alloy 260, pre-plated with bright nickel

Strain Relief:………………………… Polycarbonate

Electrical Characteristics

Modular Jack: …………………750 mating cycles

Voltage: …………………………150VAC max.

110 Contacts: ………………………200 terminations

Operating Temperature: ………………………-40° – 70°C (-40° – 158°F)

Pull Force: ………………………………….20lbs (89N)

Cat 6 SL modular jacksAMP cat 6 module

AMP keystone jacks

Hot Tags: AMP Cat 6 SL 110 Modular Jacks HY-6107C6, manufacturers, suppliers, factory, wholesale, buy discount
Related Products

Inquiry